Also in: Español · اردو · हिन्दी · العربية

How many solar panels do I need?

Work out the array size in kilowatts and how many panels it takes to cover your electricity use. You need your yearly (or monthly) use from your bills, the sun hours where you live, and the wattage of the panel you plan to buy.

kWh / year

From your electricity bills.

Usage period
h

Yearly average for the site. Use PVWatts or PVGIS for an exact figure.

%

Share of your use the panels should cover.

W

Rated power of one panel (STC), from the datasheet.

System losses (performance factor)

Array size

10 panels

4.50 kW installed (10 × 450 W)

Daily use
16.4 kWh
Array size needed
4.38 kW
Panel area (no spacing)
≈ 21 m² (231 ft²)

How it works

  1. Daily use.

    Daily kWh = yearly kWh ÷ 365

  2. Array size. Take the share you want to cover, divide by the sun hours (how many hours a day the array runs at full rated power, on average), then divide by the loss factor to make up for real-world losses.

    Array kW = daily kWh × offset% ÷ 100 ÷ sun hours ÷ loss factor

  3. Panel count. Divide by one panel's wattage and round up.

    Panels = ceil(array kW × 1000 ÷ panel W)

  4. Area. A rough roof area, assuming modern panels of about 21% efficiency (210 W per m²).

    Area (m²) = panels × panel W ÷ 210

The inputs

Electricity use
Add up 12 months of bills for the yearly kWh, so summer and winter both count. With only one bill, choose "per month"; it is multiplied by 12.
Peak sun hours
Not hours of daylight: the sunlight a day delivers, expressed as hours of full sun (1 kW per m²). Most places get 3 to 6. "Estimate from my location" uses a rough band by latitude (table below); for a figure that accounts for local weather, use NREL PVWatts or the EU's PVGIS.
Bill offset
The share of your use the panels should produce. 100% aims to cover it all over a year; less keeps the system smaller where export pays little.
Panel wattage
The rated power of one panel, typically 400 to 600 W for current residential panels.
Loss factor
The share of rated output that actually reaches you after heat, dust, wiring, mismatch and inverter losses. 0.75 is a safe typical value; 0.85 suits a cool, clean, well-designed system.

Worked example

A home uses 6,000 kWh a year, gets 4.5 peak sun hours, and wants to cover 90% with 450 W panels at a 0.75 loss factor.

  1. Daily use: 6,000 ÷ 365 = 16.44 kWh.
  2. Array size: 16.44 × 0.9 ÷ 4.5 ÷ 0.75 = 4.38 kW.
  3. Panels: 4384 ÷ 450 = 9.74, rounded up to 10 panels (4.50 kW installed).
  4. Area: 10 × 450 ÷ 210 ≈ 21 m² of panels.

Sun hour estimate by latitude

Used by "Estimate from my location". These are deliberately conservative yearly averages; deserts at the same latitude get more, cloudy coasts less.

Latitude (N or S)Peak sun hours
0°5.5
10°5.2
20°5.2
30°5
40°4.5
50°3.8
60°3

Assumptions and limits

  • Yearly averages. The array covers your use over a year, not every day: it overproduces in summer and underproduces in winter. Off-grid systems must be sized for the worst month instead.
  • One loss factor for everything. Shading, a poor orientation or a steep or flat tilt reduce output further; the factor does not include them.
  • Panel area only. The area excludes gaps, walkways, fire setbacks and row spacing on flat roofs, so the roof space needed is larger.
  • Not checked: inverter sizing, string layout, utility size limits, export rules, and future changes in use (an electric car or heat pump).

Common questions

How many solar panels do I need to power a house?

It depends on how much electricity the house uses and how sunny it is. A home using 1,000 kWh a month (12,000 kWh a year) with 4.5 peak sun hours and a 0.75 loss factor needs about 9.7 kW of panels: 22 panels of 450 W. Enter the yearly kWh from your own bills in the calculator above to get your number.

How many solar panels for a 5 kW system?

Divide 5,000 W by the panel wattage and round up: 13 panels of 400 W, 12 panels of 450 W or 10 panels of 550 W. Higher-wattage panels mean fewer panels and less roof space for the same system size.

How much roof space do solar panels need?

With typical panels of about 21% efficiency, each kW covers about 4.8 m² (51 ft²), so a 5 kW array needs about 24 m² (256 ft²) of panel area. Leave extra room for roof setbacks, walkways and, on flat roofs, the gaps between rows.

Where do I find my yearly electricity use?

On your electricity bills, in kWh (some utilities call them units). Add up the last 12 months, or multiply one month by 12 if that is all you have. Using a full year evens out summer air conditioning and winter heating.

Next, find the best angle with the tilt angle calculator, or size storage with the battery bank calculator.

Use it on the roof

The panel count calculator is also in the Solar Calibrator app, with the same formulas, offline use, PDF reports, and tilt, orientation, battery and load tools. In the app, one tap fills in sun hours from your GPS location.