Also in: Español · اردو · हिन्दी · العربية

Solar battery bank size calculator

Work out how big a battery bank you need to run your home or cabin for a set number of hours without sun or grid. It gives the size in kilowatt-hours and in amp-hours at your battery voltage.

kWh

From your electricity bill, or the loads you want to back up.

hours

How long the battery must run the loads with no sun or grid.

Battery voltage
Battery type

Battery bank size

5.8 kWh

122 Ah at 48 V

Average load
417 W
Energy used during backup
5.00 kWh
Usable depth of discharge
90%
Round-trip efficiency
95%

How it works

  1. Average load. Spread your monthly use evenly over every hour of a 30-day month.

    Average load (kW) = monthly kWh ÷ 30 ÷ 24

  2. Energy for the backup period.

    Backup energy (kWh) = average load × backup hours

  3. Bank size. You can't use all of a battery's rated capacity without shortening its life, and some energy is lost charging and discharging. Divide by both.

    Bank (kWh) = backup energy ÷ (depth of discharge × efficiency)

  4. Amp-hours. Battery capacity is often sold in Ah at a given voltage.

    Ah = bank kWh × 1000 ÷ battery voltage

The inputs

Monthly electricity use
Total kWh per month, from your bill. To back up only some circuits (fridge, lights, internet), use just their share; a load audit gives a better figure than the whole bill.
Backup time
Hours the bank must carry the load alone. Overnight is about 12 to 14 hours; a full day with no sun is 24.
Battery voltage
The bank's nominal voltage, which must match the inverter: 12 V for small systems, 24 V for medium, 48 V for most homes. It only changes the Ah figure, not the kWh.
Battery type
Lithium iron phosphate (LiFePO4) can use about 90% of its capacity at 95% efficiency. Lead-acid should only be run down to about 50%, at about 85% efficiency, so it needs a much bigger bank.

Worked example

A home uses 300 kWh a month and wants 12 hours of backup on a 48 V lithium bank.

  1. Average load: 300 ÷ 30 ÷ 24 = 0.417 kW (417 W).
  2. Backup energy: 0.417 × 12 = 5.00 kWh.
  3. Bank size: 5.00 ÷ (0.9 × 0.95) = 5.85 kWh.
  4. Amp-hours: 5.85 × 1000 ÷ 48 = 122 Ah at 48 V.

The same backup on lead-acid needs 11.8 kWh (245 Ah), about 2.0 times as much.

Assumptions and limits

  • Even use around the clock. The monthly total is spread evenly. If most of your use is in the evening, an overnight backup needs more; if it is mostly daytime, less.
  • Fixed battery figures. Lithium 90% usable at 95% efficiency; lead-acid 50% at 85%. Check your battery's datasheet; some lithium batteries already state usable capacity.
  • New batteries at mild temperatures. Capacity drops with age (plan on 70 to 80% at end of life) and in the cold. Lead-acid also delivers less at high discharge rates. Add margin for these.
  • Energy only. This does not size the inverter, which must cover your peak load in watts, nor check the battery's maximum discharge current or how long the solar array needs to recharge it.
  • One backup period. For several cloudy days in a row, enter the total hours (e.g. 72 for three days).

Common questions

How many batteries do I need for solar?

Work out the energy the loads draw during the backup time, then allow for how deeply the battery can be discharged. A home using 600 kWh a month that wants 8 hours of backup draws about 6.7 kWh in that time. That takes a 7.8 kWh lithium bank (162 Ah at 48 V), or 2 batteries of 48 V 100 Ah. A lead-acid bank for the same backup would need 15.7 kWh.

How long will a 100Ah battery last?

A 12 V 100 Ah battery stores 1.2 kWh. Running a steady 100 W load, a lithium battery lasts about 10 hours and a lead-acid one about 5 hours, because lead-acid should only be discharged to about half. Halve those times for a 200 W load.

Lithium or lead-acid: which needs a bigger battery bank?

Lead-acid. A lithium battery can use about 90% of its rated capacity, a lead-acid one about 50%, and lead-acid also loses more energy charging. For the same backup a lead-acid bank must be about 2.0 times the rated size of a lithium bank.

How do I convert kWh to amp-hours?

Divide watt-hours by the battery voltage: Ah = kWh × 1000 ÷ V. For example, 10 kWh is 208 Ah at 48 V, 417 Ah at 24 V and 833 Ah at 12 V.

Sizing the panels to recharge it? Use the panel count calculator. For the battery cables, use the wire size calculator.

Use it on the roof

The battery bank calculator is also in the Solar Calibrator app, with the same formulas, offline use, PDF reports, and tilt, orientation, battery and load tools.